+86-21-66580701      joycewang@toprise.com.cn
Home » Products » Fiberglass Sheet » Frp G11 Fiberglass Sheet Panels

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Frp G11 Fiberglass Sheet Panels

Availability:
Quantity:

downLoadImg

天瑞详情页_02


Product Name Frp G11 Fiberglass Sheet Panels
Resin Ingredient Advanced benzene-----new neopentyl glycol anti-ageing DTM-1 resin.
Surface Treatment Surface applying Morplated anti-ageing glue (80 µm thickness or so) and pastes Melinex 301.
Glass Fiber Adopting Taian high- quality glass fiber, the content no less than 30%.
Unit Weight 1800g/m² 2400g/m² 3050g/m²
Nominal Thickness 1.2mm 1.5mm 2.0mm
Heat Resistance Limit -60 to +130
Light Transmittance 75%±2% ( light green) 53%±2% (cream white)
Anti- ultraviolet Rate  99.9%
Tensile Strength  180Mpa
Flexural Strength  1.9%
Cracking Elongation Rate ≥50
Thermal Expansion Coefficient 2.2×10¯5cm/cm/
Thermal Conductivity 0.18w/m° k
Warranty 10 years

ADVANTAGE



* Good No cracking phenomenon when driving nails in roof installation
* Having close combining with color steel plate. Cross- section thickness is uniform. The shape of FRP sheet is consistent with steel plate.
* Transmittance loss rate is low. No yellowing phenomenon after long term service.
* Thermal expansion coefficient is close to that of steel plate. No cracking and water leakage in nail driving place because of expand with heat and contract with cold.
* Light through FRP sheet assumes scattering shape and gentle.
* Bright and clean appearance, no distinct air bubble and cracking on FRP sheet.
* Anti- ultraviolet and anti- chemistry corrosion.
* Anti- ageing and anti- pulverization.
* Long service life.

APPLICATION

photobank天瑞详情页_01天瑞详情页_18天瑞详情页_20天瑞详情页_21天瑞详情页_22天瑞详情页_23

Q: Could you customize the size?
A: We have standard thickness. We can customize the width, color and length. The length shall be less than the container length.
We need you to send roof profile drawing to us.

Q: What's your MOQ?
A: 500 meters.

Q: Could you recommend the model and quantity?
A: Yes, we can design the model and quantity as per the warehouse dimension and warehouse type.

Q:How about the lead time?
A: Normally 2 weeks. It depends on the quantity and our production plan.

Previous: 
Next: 

Product Category

Contact us
Contact us

QUICK LINKS

PRODUCTS

CONTACT US

  +86-21-66580701 / +86-13681692579
  +86-13681692579
  toniwang52
  No.2, Binyang Road, Taicang Port Development Zone, Jiangsu, China
Copyright © 2021 TOPRISE . All rights reserved. Sitemap  Support By Leadong