| Product Name | Best 4x8 Greenhouse Fiberglass Sheet |
| Resin Ingredient | Advanced benzene-----new neopentyl glycol anti-ageing DTM-1 resin. |
| Surface Treatment | Surface applying Morplated anti-ageing glue (80 µm thickness or so) and pastes Melinex 301. |
| Glass Fiber | Adopting Taian high- quality glass fiber, the content no less than 30%. |
| Unit Weight | 1800g/m² 2400g/m² 3050g/m² |
| Nominal Thickness | 1.2mm 1.5mm 2.0mm |
| Heat Resistance Limit | -60 to +130 |
| Light Transmittance | 75%±2% ( light green) 53%±2% (cream white) |
| Anti- ultraviolet Rate | 99.9% |
| Tensile Strength | 180Mpa |
| Flexural Strength | 1.9% |
| Cracking Elongation Rate | ≥50 |
| Thermal Expansion Coefficient | 2.2×10¯5cm/cm/ |
| Thermal Conductivity | 0.18w/m° k |
| Warranty | 10 years |
* Good roof installation nails without cracking phenomenon
* Closely combined with color steel plate. The section thickness is uniform. The shape of FRP sheet is consistent with that of steel sheet.
* Low light transmittance. No yellowing phenomenon after long-term use.
* The coefficient of thermal expansion is close to the steel plate. The nail does not crack or leak due to cold and hot expansion.
* The light through the glass fiber reinforced plastic sheet is scattered and soft.
* Smooth appearance, no obvious bubbles and cracks.
* UV resistance, chemical corrosion resistance.
* Anti aging, anti crushing.
* Long service life.
Q: Could you customize the size?
A: We have standard thickness. We can customize the width, color and length. The length shall be less than the container length.
We need you to send roof profile drawing to us.
Q: What's your MOQ?
A: 500 meters.
Q: Could you recommend the model and quantity?
A: Yes, we can design the model and quantity as per the warehouse dimension and warehouse type.
Q:How about the lead time?
A: Normally 2 weeks. It depends on the quantity and our production plan.