Composite Honeycomb Corrugated Fiberglass Sheet

* Good No cracking phenomenon when driving nails in roof installation
* Having close combining with color steel plate. Cross- section thickness is uniform. The shape of FRP sheet is consistent with steel plate.
* Transmittance loss rate is low. No yellowing phenomenon after long term service.
* Thermal expansion coefficient is close to that of steel plate. No cracking and water leakage in nail driving place because of expand with heat and contract with cold.
* Light through FRP sheet assumes scattering shape and gentle.
* Bright and clean appearance, no distinct air bubble and cracking on FRP sheet.
* Anti- ultraviolet and anti- chemistry corrosion.
* Anti- ageing and anti- pulverization.
* Long service life.

Q: Could you customize the size?

A: We have standard thickness. We can customize the width, color and length. The length shall be less than the container length.
We need you to send roof profile drawing to us.

Q: What's your MOQ?
A: 500 meters.

Q: Could you recommend the model and quantity?
A: Yes, we can design the model and quantity as per the warehouse dimension and warehouse type.

Q:How about the lead time?
A: Normally 2 weeks. It depends on the quantity and our production plan.

Waste Storage Industry 

Industrial waste materials which are toxic, flammable, corrosive and waste with chemical reactivity abound in all aspects of production. 

Generally its PH value is < 3 or > 12. Since industrial waste materials containing large amounts of volatile phenol, fluoride, suspended particles, 

arsenic, PB and hazardous substances are storage for a long time, the surrounding environment will be presented certain acidic 

or alkali and color steel sheet or galvanized steel sheet will be easily corroded by initiator or transition metal element.

TOPRISE Project Case ——Yingkou Jiachen Steel

Waste Materials Warehouse roof uses TOPRISE standard anti-corrosive sheet, steel sheet is used for wall. Acid mist formed by waste

 generated SO2 and water results corrosion and perforation on a large area of wall. Actual comparison showed as picture which from we 

can clearly distinguish its damaged condition.

Steel Industry 

Steel is mainly composed by iron and carbon and containing Si, Mn, P, S and other impurity elements. Iron and steel production process 

is divided into beneficiation, sintering, coking, blast furnace, converter, continuous casting, rolling and other processes. In the iron and

 steel smelting process, large amounts of emissions, SO2, Cl2, NOx, CO and blast furnace gas, etc. will be produced from transportation

 of raw materials and fuel, loading and u

TOPRISE Project Case——Baosteel Zhanjiang Iron & Steel Co., Ltd Project is located in the typhoon areas in Zhanjiang, Guangdong. 

There are amounts of exhaust gas corrosion and salt spray corrosion caused by seaside humid marine climate. 

They use TOPRISE flame retardant anti-corrosion sheet (blast furnace operation).