Surface applying Morplated anti-ageing glue (80 µm thickness or so) and pastes Melinex 301.
Glass Fiber
Adopting Taian high- quality glass fiber, the content no less than 30%.
Unit Weight
1800g/m² 2400g/m² 3050g/m²
Nominal Thickness
1.2mm 1.5mm 2.0mm
Heat Resistance Limit
-60 to +130
Light Transmittance
75%±2% ( light green) 53%±2% (cream white)
Anti- ultraviolet Rate
99.9%
Tensile Strength
180Mpa
Flexural Strength
1.9%
Cracking Elongation Rate
≥50
Thermal Expansion Coefficient
2.2×10¯5cm/cm/
Thermal Conductivity
0.18w/m° k
Warranty
10 years
* Good No cracking phenomenon when driving nails in roof installation * Having close combining with color steel plate. Cross- section thickness is uniform. The shape of FRP sheet is consistent with steel plate. * Transmittance loss rate is low. No yellowing phenomenon after long term service. * Thermal expansion coefficient is close to that of steel plate. No cracking and water leakage in nail driving place because of expand with heat and contract with cold. * Light through FRP sheet assumes scattering shape and gentle. * Bright and clean appearance, no distinct air bubble and cracking on FRP sheet. * Anti- ultraviolet and anti- chemistry corrosion. * Anti- ageing and anti- pulverization. * Long service life.
Q: Could you customize the size? A: We have standard thickness. We can customize the width, color and length. The length shall be less than the container length. We need you to send roof profile drawing to us.
Q: What's your MOQ? A: 500 meters.
Q: Could you recommend the model and quantity? A: Yes, we can design the model and quantity as per the warehouse dimension and warehouse type.
Q:How about the lead time? A: Normally 2 weeks. It depends on the quantity and our production plan.